Nylon O-Rings
Overview
Nylon O-Rings, listed under O Rings by Ningbo Savvy Rubber & Plastics Co., Ltd in Ningbo, Zhejiang. Published figures include physical properties TEST METHOD, unit TEST RESULTS and density ISO 1183.
Technical specifications
| Physical Properties | TEST METHOD |
|---|---|
| UNIT | TEST RESULTS |
| Density | ISO 1183 |
| Viscosity Number | ISO 307 |
| Relative Solution Viscosity | DSM method |
| Melt Viscosity (260°C) | DSM method at 260°C |
| Transparency | DSM method |
| Mechanical Properties | TEST METHOD |
| Tensile Modulus | DSM Method at 50 mm/min |
| Yield Stress (Parallel) | ISO 527-3 |
| Maximum Stress (Parallel) | ISO 527-3 |
| Maximum Strain (Parallel) | ISO 527-3 |
| Trousers Tear Strength (Parallel) | ISO 6383-1 |
| Puncture Resistance | DSM Method |
| Coefficient of Static Friction | ISO 8295 |
| Coefficient of Dynamic Friction | ISO 8295 |
| Thermal Properties | TEST METHOD |
| Chemical & Other | TEST METHOD |
| Oxygen Transmission Rate (23°C/0%RH) | DIS 15105-1/-2 |
| Oxygen Transmission Rate (23°C/85%RH) | DIS 15105-1/-2 |
| Continuous Temperature Range | -30°C (-22°F) to 80°C (176°F) for PA6 |
| Low Operating Temperature Limit | -40°C (-40°F) for PA6 |
| Short-Term Maximum Temperature | 100°C (212°F) for PA6 |
| Durometer Hardness Range | Shore D 50-60 |
| Standard Durometer Hardness | Shore D 55 |
| Cross Section Width (CS) | 0.8 to 30 mm (0.032 to 1.181 inch) |
| Inside Diameter (ID) | 0.9 to 650 mm (0.035 to 25.590 inch) |
| Material Type | 100% Virgin Unfilled Nylon / Polyamide / PA6 |
